Beacon Foam-Tac Glue - 2 ounce bottle
Beacon Foam-Tac Glue bonds Depron, EPS, EPP, XPS, EPO, and many other kinds of foam quickly. It does not dissolve polystyrene foams. When dry it remains flexible and clear. It's also great for bonding carbon fiber. Comes in a 2oz bottle.
Won't attack nor melt foams.
Bonds EPP like itself. Make a Butt-Joint and you won't be able to find it later. Stronger than the foam itself when cured.
SUPERIOR GLUE FOR SPECIAL FOAMS
GREAT FOR REMOTE CONTROLLED PLANES!
SUPERIOR GLUE FOR BONDING SPECIAL FOAMS
|•||Foam-safe glue bonds Depron, EPS, EPP, XPS, EPO, and many other types of foam as well as carbon fiber and wood.|
|•||Excellent for building or repairing RC planes.|
|•||Does not attack, melt or dissolve foams but holds quickly and cleanly.|
|•||Remains flexible and clear once dry, never brittle. Super strong bond is like welding the foam together.|
|•||Requires much less glue for a permanent bond than a cyanoacrylate- based glue. Won’t glue fingers together.|
|•||ALWAYS test on scrap materials first to ensure compatibility.|
|•||Surfaces must be clean, dry, and free of dust and grease.|
|•||Spread glue evenly on both sides of material to be bonded.|
|•||Allow surfaces to air dry for 10-20 minutes depending upon size of area being glued.|
|•||Press surfaces firmly together.|
|•||Maximum bond is achieved within 24 hours or less.|
|•||Always replace the flat white cap after each use to prevent product evaporation.|
|•||Do not use near any open flame or ignition source. Avoid prolonged breather of vapors. Keep out of reach of children.|
We Also Recommend